PCB design services involve specialized activities aimed at creating an optimum printed circuit board layout using CAD software and other specialized PCB design tools. There are different kinds of PCBs and the process for each one may vary a bit. Regardless of the type of board or layout, though, it's always going to be roughly the same multi-stage designing process that begins with schematic capture.
Information about three key aspects of the project must be provided by the client to the designer. The schematic is obviously the most important thing. Note that it may also be in the netlist format. The netlist file contains the circuit's connectivity details and descriptions for the components.
The client also has to provide the BOM (bill of materials) that lists all the components to be used and their footprints, although some designers also offer assistance with component footprint capture. Then there's also the board outline that must be provided. The outline, schematic/netlist and the BOM together constitute all the necessary information that will be used for designing the PCB.
Designers start with the netlist or schematic and use techniques such as library development, signal integrity checks, thermal simulation, stress analysis, EMI checking, etc. The series of intermediate steps lead to the development of a file in the gerber format. This is the final end product that designers hand over as a complete PCB image that is directly used in the manufacturing process.
The designer must be capable of coming up with solutions for complicated analog, digital, RF and mixed PCBs. Then there's also the type of board, which can be single-sided, double-sided or multi-layered. The board's size may vary, and so can the pin densities and component quantities.
There's also the question of deciding on the characteristics of the board. This refers to the method used to mount components and create the traces for the circuit. Surface-mount technology is the most popular technique used now for mounting components.
Components on boards that use this technology have their end caps soldered on the same side as the components themselves. This is hugely different from earlier techniques such as through-hole boards. The leads of components in such older boards were inserted through holes and soldered on to the traces on the other side.
Apart from the schematic capture and subsequent board designing steps, the designer may also be called upon to evaluate existing designs, components and footprint captures. Sometimes they're also involved in prototype procurement, and may be asked to do availability checks and collect pricing information against the BOM.
There may, in fact, be other PCB design services required even after delivery of the end product. Customers often need to do minor changes to the design right away and on an ongoing basis, and reorders are also on the cards. Designers are sometimes asked to reverse engineer the process, starting with gerber files. Coming up with a netlist or schematic from a gerber file helps the client rebuild the circuit to implement large-scale changes.
Information about three key aspects of the project must be provided by the client to the designer. The schematic is obviously the most important thing. Note that it may also be in the netlist format. The netlist file contains the circuit's connectivity details and descriptions for the components.
The client also has to provide the BOM (bill of materials) that lists all the components to be used and their footprints, although some designers also offer assistance with component footprint capture. Then there's also the board outline that must be provided. The outline, schematic/netlist and the BOM together constitute all the necessary information that will be used for designing the PCB.
Designers start with the netlist or schematic and use techniques such as library development, signal integrity checks, thermal simulation, stress analysis, EMI checking, etc. The series of intermediate steps lead to the development of a file in the gerber format. This is the final end product that designers hand over as a complete PCB image that is directly used in the manufacturing process.
The designer must be capable of coming up with solutions for complicated analog, digital, RF and mixed PCBs. Then there's also the type of board, which can be single-sided, double-sided or multi-layered. The board's size may vary, and so can the pin densities and component quantities.
There's also the question of deciding on the characteristics of the board. This refers to the method used to mount components and create the traces for the circuit. Surface-mount technology is the most popular technique used now for mounting components.
Components on boards that use this technology have their end caps soldered on the same side as the components themselves. This is hugely different from earlier techniques such as through-hole boards. The leads of components in such older boards were inserted through holes and soldered on to the traces on the other side.
Apart from the schematic capture and subsequent board designing steps, the designer may also be called upon to evaluate existing designs, components and footprint captures. Sometimes they're also involved in prototype procurement, and may be asked to do availability checks and collect pricing information against the BOM.
There may, in fact, be other PCB design services required even after delivery of the end product. Customers often need to do minor changes to the design right away and on an ongoing basis, and reorders are also on the cards. Designers are sometimes asked to reverse engineer the process, starting with gerber files. Coming up with a netlist or schematic from a gerber file helps the client rebuild the circuit to implement large-scale changes.
About the Author:
Read more about PCB Design Services For Electronics Manufacturers visiting our website.
Aucun commentaire:
Enregistrer un commentaire